OPTIFLUX 1050
Electromagnetic flowmeter for basic applications with conductive liquids
- Cost-effective flow measurement of liquids (≥5 μS/cm) up to +120°C / +248°F
- Extra isolation of electronics for use in high humidity areas
- Wafer-style design: DN10…150 / ⅜…6", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®, Modbus
OPTIFLUX 1050 C – Compact version
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, extensive diagnostics or a wide range of communication options are not a priority. The extra isolation of the electronic device and housing makes this EMF also suitable for use in areas with extreme humidity.
The OPTIFLUX 1050 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. It comes with current output (incl. HART®) or active pulse/frequency output and Modbus. A full on-site verification of the EMF without process interruption can be carried out using the OPTICHECK service tool.
Product highlights
- Bi-directional flow measurement over a wide dynamic range
- Lightweight and compact wafer-style ("sandwich") design for space saving installation
- Reinforced PFA liner: Smooth surface, excellent chemical resistance
- Full bore design: No moving parts, no wear, no pressure loss
- Standard measurement accuracy: ±0.5% or ±1 mm/s of measured value (MV)
- No maintenance required
- On-site verification of flowmeter with OPTICHECK service tool
Typical applications
Water and wastewater industry
- Simple water applications (potable, raw, salt water, wastewater, heated and cooled water)
- Abstraction and irrigation
- Water circulation and treatment systems
Agricultural industry
- Sludge, manure, mud, slurry
Machinery and apparatus (OEM industry)
- Batching, dosing and mixing systems
- Compact and mobile skids
- Chemical handling systems
- Firefighting systems, foam mixing, control of sprinkler systems
- Filtration systems
- Pump wagons
Accessories for this product
OPTICHECK Master
Handheld for in-depth verification, device commissioning and monitoring
- On-site performance check and verification (level 0,1,2) without process interruption
- Convenient commissioning of field devices, e.g. zero calibration
- Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
OPTICHECK DTM
DTM for advanced device verification and commissioning
- Usable with any FDT frame application from the control room or on site
- Advanced verification (level 0,1) without process interruption
- Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
Applications
Related products
IFC 050
Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors
- Compact and wall-mounted housing (with or without display)
- With sensor and process diagnostics for basic requirements
- 4-wire, 1 x 4…20 mA, pulse, frequency, status, HART®, Modbus etc.
OPTIFLUX 1000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
- Sandwich design with free pipe cross-section
- Connection sizes: DN10…150 / ⅜…6"
- Liner: Reinforced PFA
Links
Download Center
OPTIFLUX 1000
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver