OPTIFLUX 1100
Electromagnetic flowmeter for general applications with conductive liquids
- Economical flow measurement of liquids (≥5 μS/cm) with solid content (≤10%)
- -25…+120°C / -13…+248°F
- Wafer-style design: DN10…150 / ⅜…6", max. PN40 / ASME Cl 300
- 4…20 mA, pulse, frequency, status, HART®
OPTIFLUX 1100 C – Compact version
The OPTIFLUX 1100 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for general applications with conductive liquids (≥5 μS/cm) and lower solid content (up to 10%). Unlike the basic device OPTIFLUX 1050, the OPTIFLUX 1100 offers a better accuracy. It is suitable for use in various industries – from water, wastewater and mobile applications to machine building (OEM), agriculture and utilities to firefighting.
The OPTIFLUX 1100 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. A full on-site verification of the OPTIFLUX 1100 without process interruption can be carried out using the OPTICHECK service tool.
Product highlights
- Bi-directional flow measurement over a wide dynamic range
- Lightweight and compact wafer-style ("sandwich") design for space saving installation
- Reinforced PFA liner: Smooth surface, excellent chemical resistance
- Pipe cross-section without restrictions for slurries with non abrasive solid particles
- Standard measurement accuracy: ±0.3% or ±1 mm/s of measured value (MV)
- Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
- No periodical maintenance needed
- On-site verification of flowmeter with OPTICHECK service tool
Typical applications
Water and wastewater industry
- Standard water applications (potable, raw, salt water, wastewater, heated and cooled water)
- Abstraction and irrigation
- Water circulation and treatment systems
Agricultural industry
- Sludge, manure, mud, slurry
Machinery and apparatus (OEM industry)
- Compact and mobile skids
- Chemical handling systems
- Firefighting systems, foam mixing, control of sprinkler systems
- Filtration systems
- Pump wagons
HVAC industry
- Heat transfer and cooling systems
- Pump control
Accessories for this product
OPTICHECK Master
Handheld for in-depth verification, device commissioning and monitoring
- On-site performance check and verification (level 0,1,2) without process interruption
- Convenient commissioning of field devices, e.g. zero calibration
- Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
OPTICHECK DTM
DTM for advanced device verification and commissioning
- Usable with any FDT frame application from the control room or on site
- Advanced verification (level 0,1) without process interruption
- Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
Applications
Related products
IFC 100
Electromagnetic flow converter for combination with OPTIFLUX and WATERFLUX flow sensors
- Compact and wall-mounted housing
- With many sensor and process diagnostics for standard requirements
- 4-wire, 4…20 mA, pulse, frequency, status, HART®
OPTIFLUX 1000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
- Sandwich design with free pipe cross-section
- Connection sizes: DN10…150 / ⅜…6"
- Liner: Reinforced PFA
Links
Download Center
OPTIFLUX 1000
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver