SENSOFIT FLOW 2000 C

Flow-through assembly for water and wastewater applications

  • For use with optical oxygen and turbidity sensors OPTISENS ODO and TUR 2000 (inline versions)
  • Sensor connection: union nut; Process connection: hose connection
  • For measurement in small sample streams
  • Max. +50°C / +122°F and 6 bar / 87 psi

SENSOFIT FLOW 2000 C

SENSOFIT FLOW 2000 C

The SENSOFIT FLOW 2000 C is a flow-through assembly to install the OPTISENS ODO 2000 optical oxygen sensor and the OPTISENS TUR 2000 turbidity sensor, e.g. on measuring panels. The flow cell allows continuous measurement under controlled flow conditions. It comes with different hose diameters for (potable) water applications (6 mm / 0.2″ outer, 4mm / 0.16″ inner diameter) and wastewater applications (8 mm / 0.31″ outer, 6 mm  / 0.2″ inner diameter). For precise flow regulation, the (potable) water version is equipped with an integral needle valve at the outlet side, allowing for hassle-free low-range turbidity measurement. The assembly is made of robust polyvinyl chloride (PVC) and suitable for use up to 6 bar / 87 psi and max. +50°C / +122°F.

Typical applications

Water and wastewater industry

  • Measurement in small sample streams, e.g. on measuring panels
  • At bypass measuring points

Related products

OPTISENS ODO 2000

Optical oxygen sensor for water and wastewater applications

  • 2-wire loop powered, 4…20 mA or Modbus for direct connection to a PCS; calibration and configuration via Modbus or with MAC 100 transmitter
  • For immersion or insertion
  • 0…20 mg/l; Max +50°C / +122°F; 6 bar / 87 psi
  • With rugged PVC sensor body, available with spray cleaning nozzle (immersion version)

View product details

OPTISENS TUR 2000

Optical turbidity sensor for water and wastewater applications

  • For use with analytical transmitter
  • For immersion or insertion
  • 0…4/40/400  NTU/FNU; Max. +50°C / +122°F; 6 bar / 87 psi
  • 90° scattered light (NIR-LED) measurement acc. to ISO 7027

View product details