OPTITEMP TRA-P10
Resistance (RTD) temperature assembly for standard applications
- Compression fitting connection
- DIN-style based on form 2, welded multipart thermowell with straight tip
- -40…+600°C / +1100°F
OPTITEMP TRA-P10 – Standard version
The OPTITEMP TRA-P10 is a plug-in RTD sensor assembly with a straight welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases. It is designed to operate up to +600°C / +1100°F.
The OPTITEMP TRA-P10 can be used in pipes and tanks, at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The RTD is available with ATEX and IECEx approvals.
Product highlights
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
Typical applications
- Standard applications with low to medium pressures and flow velocities
- Temperature measurement in pipes and tanks
- Suitable for applications where assemblies complying with DIN standards are required
- Basic measuring tasks in various industries:
- Chemical and petrochemical
- Oil and gas
- Power generation
- Machinery and apparatus / OEM
- Iron and steel
- Pulp and paper
Applications
General information
| Measurement principle | Resistance (RTD) |
| Measured media | Gases, Liquids |
| Measuring point | Pipe, Tank |
| Measuring insert type | Replaceable spring loaded mineral isolated measuring insert OPTITEMP TR 100 |
| Measuring insert replaceable | Yes |
| RTD element type | 1 x Pt100, 2 x Pt100 |
| RTD configuration | 2-wire, 3-wire, 4-wire |
| Temperature sensor connection type option | Ceramic terminal block, Flying wires, Temperature transmitter |
| Assembly with thermowell | Yes |
| Temperature assembly design | DIN-style |
| Thermowell form (according to DIN 43772) | Form 2 |
| Thermowell tip design | Straight |
| Thermowell type | Multipart welded |
| Thermowell diameters | Ø10 mm / 0.39", Ø11 mm / 0.43", Ø12 mm / 0.47", Ø9 mm / 0.35" |
Approvals/Standards
| Certificates/Approvals Ex | ATEX, IECEx |
Process connections
| Compression fittings | Male: G1/2, G3/4 1/2 NPT |
Links
Download Center
OPTITEMP
Download Center
- Technical datasheets and handbooks
- Flyers and brochures
- Certificates and approvals
- Software and driver